Inquiry (采购产品): wood cutting To begin, I would like you to visit my web site so as to understand the laser cutting that I need. www.patternsbythesea.com I lay a 8 1/2" x 1 1/2" x 3/4" piece of wood (oak,cherry,walnut) flat and trace with a template the design of the wooden hinge and cut with a bandsaw. Next, I lay the wood piece or blank on edge and by eye cut the profile. The edges of the hinge are then rounded using a spindle sander. Before cutting the backend of the blanks away from the tulip, spear, or heart design are half-rounded and a 3/4" hole is drilled 3/8" in from edge or centered. Is it possible for you do any and/or all of these operations and if so can you can you email me a quote on the ones that you can do on runs of 1,000 , 10,000 , 25,000 and 100,000. gary@www.patternbythesea.com Thank You, GARY E. SEACHRIST **** Hidden Message ***** Gary Seachrist P>O>BOX 552 Manheim, PA 17545 USA Company: Patterns By The Sea Title: Owner Phone: 717-664-2967 Fax: 717-664-2967 E-mail: gary@www.patternsbythesea.com **** Hidden Message ***** gary@www.patternsbythesea.com
