Inquiry (采购产品): Bronze Bar Stock Dear Sir, We need to purchase bronze bars to be used to manufacture gears in Taiwan or China. Please quote a price to our Metallurgist Tim Yu and to me. His e mail address is TimYu@ttigroup.com This is an on going effort not just a prototype. Gear Material - The drawings has the following information. MATERIAL: C62300 From ANSI/AGMA 2011-B89 (Revision of AGMA 240.01) January 1989 on page 22 is the following: Table 4-10 Chemical Analysis of Wrought Bronze Alloys C62300 Fe 2.0 to 4.0% Sn 0.60% max Al 8.5 to 11.0% Mn 0.50% max ) Si 0.25% max (Ni plus Co 1.0% max) Cu remainder Table 4-11 Typical Mechanical Properties of Wrought Bronze Ally Rod and Bar C62300 Tensile Strength 90 ksi Yield Strength 45 ksi Elongation in 2 inches percent 25% min. Hardness 180 HB (1000kgf) Very truly yours, Weldon H. Clark Jr. Advanced Staff Engineer - Gear Design Ryobi Technologies, Inc. 225 Pumpkintown Highway PO Box 35 Pickens, SC 29671 Telephone 864-878-6331 ext. 4334 Fax 864-898-4088 weldon.clark@ttigroupna.com **** Hidden Message ***** Weldon Clark 225 Pumpkintown Rd. PO Box 35 Pickens, SC 29671 USA Company: TTI Title: Gear Engineer Phone: 864-878-6331 ext 4334 E-mail: weldon.clark@ttigroupna.com **** Hidden Message ***** weldon.clark@ttigroupna.com
