Inquiry (采购产品): EB weld job I have a thin 347SS bellows welded on the OD to a 304SS flange, but it leaks. I was hoping you might be able to EB weld the two on the ID. The cavity in which the weld would take place is 1.5" deep by 1.5" in diameter. There is a slight gap (~0.020") between the parts. If that is a problem, I think the gap could be eliminated by grinding off the old weld. Send me an e-mail, and I can send you pictures of the bellows/flange assembly. Best regards, Jon W. Haas **** Hidden Message ***** Jon Haas CO 80201-0179 USA Company: Lockheed Martin Title: Test Engineer Phone: 303.971.7219 E-mail: jon.w.haas@lmco.com **** Hidden Message ***** jon.w.haas@lmco.com
