NSN:5345-01-334-7098/wheel abrasive |
| 01-16 23:50:49 来源： 作者： |
|
NSN:5345-01-334-7098/wheel abrasive Inquiry (采购产品): NSN:5345-01-334-7098/wheel abrasive I am requesting the following for NSN:NSN:5345-01-334-7098/wheel abrasive QTY: 37 BX to Tinker AFB,OK QTY 80 BX to Tinker AFB,OK I do require the information listed below: Unit Price: Delivery time: FOB Point: Country of Origin: Please respond ASAP, thank you . Merit Abrasive P/N - 088341-31011 NSN: 5345-01-334-7098 WHEEL, ABRASIVE: The abrasive miniature “Grind-O-Flex” flap wheels, shall be mounted on a “built-in”, 1/4-20 inch threaded spindle. Shall be similar to Figure 1 and in accordance with the following industry standards and characteristics as follows: ABRASIVE - Aluminum oxide GRIT - 180 BACKING - “X” weight drills cloth COATING - Closed GRADE - Non-waterproof BOND - Resin or glue DIAMETER - 1 inch Figure 1 WIDTH - 1 inch SPEED RATING - 30,000 rpm (max) DESIGNED USE - Metal working Unit of issue - BX (10 per box) ANSI B7.7 - Safety Regulations for Abrading Materials With Coated Abrasive Systems ANSI B74.18 - Specifications For Grading of Certain Abrasive On Coated Abrasive Products Application for copies of ANSI standards should be addressed to the American National Standards Institute, 11 West 42nd Street, New York, NY 10036. ASTM D 5035 - Standard Test Methods for Breaking Force and Elongation of Textile Products (Strip Force) ASTM E 29 - Standard Practice For Using Digits In Test Data To Determine Conformance With Specifications Application for copies of ASTM standards should be addressed to ASTM, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959. The documents referenced in this purchase description shall be the issues in effect on the date of issuance of the invitation for bids or request for proposals. In the event of a conflict between this purchase description and a document referenced herein, this purchase description shall take precedence. Abrasive Grain: The abrasive grain shall be crushed and graded in accordance with ANSI B74.18. Shall be evenly dispersed and completely cover the surface of the backing. Adhesive: Any good quality adhesive is acceptable providing that dislodging of abrasive grain is minimized. Abrasive Coverage: Open Coat - 50 to 70% coverage, evenly dispersed Closed Coat - Complete and uniform coverage Cloth backing material: The treated cloth backing material shall be in accordance with Table 1 and tested in accordance with ASTM D 5035. When waterproof material is specified, the backing material shall be treated to make it impervious to water. TABLE I COATED CLOTH BACKING AVERAGE BREAKING STRENGTH TYPE BACKING WEIGHT WARP DIRECTION FILLING DIRECTION (lbs per square inch minimum) Jeans cloth “J” weight 80 lbs/in 35 lbs/in Drills cloth “X” weight 130 lbs/in 50 lbs/in Heavy drills cloth “Y” weight 160 lbs/in 65 lbs/in NOTE: Tolerance plus or minus 15% Workmanship. The abrasive grain shall be evenly dispersed and positively bonded throughout the coated product. Shall be designed to preclude disintegration of the backing and dis-lodging of the grain material during normal usage. Shall meet the requirements stated in ANSI B7.7. PRODUCT CONFORMANCE: The products provided shall meet the salient characteristics of this Item Purchase Description, conform to the producer's own drawings, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance. MARKING: Shipments to GSA and other civilian agencies shall be marked in accordance with FED-STD-123. Shipments to the Department of Defense (DOD) shall be marked in accordance with MIL-STD-129. DATA SUBMISSION: The material safety data sheet (MSDS) shall be submitted in accordance with the latest revision of Federal Standard No. 313. For shipments to GSA distribution centers or Customer Supply Centers, the contractor shall provide one copy of the MSDS inside or affixed to the outside of each transport package (as defined in paragraph 1 of FED-STD-123), if affixed outside, the MSDS must be placed in a weather-resistant envelope. PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. In the event a pallet or skid is used for shipping, the following notice shall apply: Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, “Guidelines for Regulating Wood Packaging Material in International Trade”. Countries endorsing the IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Clause D-FSS-468 requires non-manufactured wood pallets and other non-manufactured wood packaging material used in shipments destined to IPPC compliant countries require the appropriate wood treatment. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall comply with applicable DLA Regulations and Procurement Letter PROCLTR 02-17. **** Hidden Message ***** Linda Hendry 76102 USA Company: GSA Title: Logistics Support 1 E-mail: linda.hendry@gsa.gov **** Hidden Message ***** linda.hendry@gsa.gov |
|
|
|
|
|
|
