Inquiry (采购产品): REQUEST FOR QUOTE The following will be the specification of the relay, 1. The Relay should be hermetically sealed. 2. Two Alternatives with 8 Pin or 11 Pin relay with the following terminal arrangement, 8.14 Relays 8.14.1 Relays shall be of the dust-tight, 11-pin or 8-pin plug-in type. Exception: Relays provided as an integral part of manufactured electronic equipment installed within cabinets may use that manufacturer's standard offering. 8.14.2 The 11-pin contact arrangement is three-pole, double-throw (3PDT), wired in accordance with the following list. Looking at the base of the relay with the key cam straight-down and the cam between 1 and 11; the connections are clockwise numbered 1 through 11. a) Coil is between connectors 2 and 10 b) Common connector 1 is normally closed to connector 4 and normally open to connector 3 c) Common connector 6 is normally closed to connector 5 and normally open to connector 7 d) Common connector 11 is normally closed to connector 8 and normally open to connector 9 8.14.3 The 8-pin contact arrangement is double-pole, double-throw (DPDT), wired in accordance with the following list. Looking at the base of the relay with key cam straight-down and the cam between 1 and 8; the connections are clockwise numbered 1 through 8. a) Coil is between connectors 2 and 7 b) Common connector 1 is normally closed to connector 4 and normally open to connector 3 c) Common connector 8 is normally closed to connector 5 and normally open to connector 6 3. The following will be the required number of units, - 48 units of 120VAC coil voltage. - 52 units of 24VDC coli voltage. - 18 units of switch contact block with Allen Bradley Part #800T-XD2P (N/O contact). 4. The width of the relay base should not be more than 27 mm maximum. Below this size such as 26 mm and below are acceptable for relay base width. 5. Pull-in voltage shall be 80% or less of nominal voltage. Your immediate response is greatly appreciated. **** Hidden Message ***** AKHLAQ AHMED 105689 Company: AESARABIA LTD E-mail: akhlaq_ahmed@aesarabia.com **** Hidden Message ***** akhlaq_ahmed@aesarabia.com
