Inquiry (采购产品): sprinkler system cover I need a 27 inch by 25 inch plastic cover for an outdoor sprinkler system (1/2 inch to 5/8 inch thick). The sprinkler system sits recessed in a concrete box 23 inch square with three sides flush at ground level and one side has an (appx 4 inch) raised cement backing. On one side of the plastic plate it would be good to have three of the edges tapered (both 27 inch edges and one 25 inch edge). The other side needs a small extrusion on three sides (centered in the plastic plate 23 inches - to keep the plate from sliding). There would be a two inch overhang from the extrusion on each side of the 27 inch side and just one two inch overhang on the 25 inch side. The extrusion on the opposite side of the 25 inch plate would be flush with the edge. Further, it would be desirable to have a minimal slope (perhaps two degrees) made on the 25 inch side for water runoff. I hope my description can accurately be visualized and if we do business the details will be confirmed. Does your company do this sort of work? If so, what would be the cost to manufacture and mail to my home address? Thanks! **** Hidden Message ***** Vernon Jones 94598 Company: home E-mail: joycekjones@sbcglobal.net **** Hidden Message ***** joycekjones@sbcglobal.net