Inquiry (采购产品): DC Motor Carl@netvision.net.il http://www.acengineering.co.il 5/26/2010 Subject: Electric motor requirement Please provide recommendation /quote. Motor meets RTCA/DO-160 Motor (Gear Motor) can be DC brush or brushless. If brushless, electronic drive circuitry should be within motor housing. A. Electrical Power Supply will be 28 VDC nominal, 22-30.3 VDC range. B. Maximum Amperage draw shall be 8 Amps. C. The operating altitude level will be -1000 feet to 16,000 feet altitude. D. The proof pressures shall be 26 in-Hg (vacuum). Motor speed 1400 RPM at load of 60 watts. Face mounting Single output shaft. Stalled rotor and thermal protection. Power connector on motor body - preferable Ambient pressures of -1000 to 51,000 feet altitude and ambient temperatures of -22oC to +55oC. Motor to meet RTCAlDO-160F Section 17 Voltage spike. and section 22-Lightning Induced Transient Susceptibility Quantity required 30/ month. Best Regards Carmeli Adahan AC Engineering 11 Netivei Am, Jerusalem, Israel 97552 Phone: 972-50640 6000 or 972-2-5865735 Fax: 972-2-5862714 **** Hidden Message ***** Carmeli Adahan 97552 ISR Company: AC Engineering E-mail: carl@netvision.net.il **** Hidden Message ***** carl@netvision.net.il
