Inquiry (采购产品): labels Please research a label manufacturer / vendor labeling fixtures. We will purchase ETL labels direct from ETL – but we need additional labels for the fixtures that will have other info – and they will need to have sequential serial numbers. Check with this company - http://www.materialsconverting.com/main.html Also, this is the standard by which they must adhere to the fixture - The label manufacturer should know this standard – it is the standard for all exterior lighting fixtures. 3.4 Test of marking Compliance with the requirements of 3.2 and 3.3 is checked by inspection and by the following test: The durability of the marking is checked by trying to remove it by rubbing lightly for 15 s with a piece of cloth soaked with water and, after drying, for a further 15 s with a piece of cloth soaked with petroleum spirit and by inspection after the tests detailed in Section 12 have been completed. Dit document is door NEN onder licentie verstrekt aan: / This document has been supplied under license by NEN to: Kema Nederland B.V. E. Cremers-Smit 2008/04/28 – 38 – 60598-1 ??IEC:2008 After the test, the marking shall be legible, marking labels shall not be easily removable and they shall show no curling. NOTE The petroleum spirit used should consist of a solvent hexane with a content of aromatics of maximum 0,1 % by volume, a value of 29 % for kauri-butanol, an initial boiling-point of approximately 65 °C, a dry-point of approximately 69 °C and a density of approximately 0,68 g/cm3. **** Hidden Message ***** Camille Morrow 75006 Company: Aphos Lighting LLC E-mail: cmorrow@aphoslighting.com **** Hidden Message ***** cmorrow@aphoslighting.com
