Inquiry (采购产品): Clad Steel fab Dear Sirs: We are a specialty company, engaged in the manufacture of steel plate with corrosion resistant alloys (CRA), clad on top of the steel. We have an immediate need for a shop, located within 150 miles of Cleveland, OH; and which is capable of rolling and welding our test specimens together. Welds, dual materials and multiple pass are to be in accordance with ASME Section 8, Pressure Vessel regulations. General AWI guidelines for these weld procedures are available upon your request. ========= Specs for the test specimen coupons are: 1. Butt weld carbon steel with CRA cladding, CS at 0.375" to 0.500 thick, cladding at 2mm. Dims around 6 x 6 inches. 2. Pipe to be rolled from similar plate and then longitudinally welded; dims at 3 to 4 inch diameter and LOA of 6 to 12 inches. 3. Ultimately, we will need larger diameters and longer length pipes. Please reply if your shop is interested in this work. I can be reached at: tmournian@mesocoat.com, Cell: 818-519-7754. I look forward to your reply, Tim Mournian Business Development Manager www.mesocoat.com **** Hidden Message ***** Tim Mournian 77355-3119 Company: MesoCoat, Inc. E-mail: tmournian@mesocoat.com **** Hidden Message ***** tmournian@mesocoat.com
