Quote Request |
| 02-08 05:31:36 来源： 作者： |
|
Quote Request Inquiry (采购产品): Quote Request ALUMINUM PLATE, (11) each; Commercial Aviation Grade: PM 7050-T7451, MMS-1420, Dimensions: 3-1/2" Thick X 59" Wide X 52" Long. Deviations in dimensions will not be accepted. Longitudinal grain direction must be parallel with the 51" Length. Line Item 0002: ALUMINUM PLATE, TEST COUPON, includes (3) each; 625" Square X 4" for test coupons (1) each 1" Square for chemical analysis. (1) each 3-1/2" Thick X 1 Foot Square. Longitudinal grain direction must be parallel with the 51”Length. Grain direction is required to be identified on each plate and must be stated on the COC. All material must be from the same batch/same heat lot from the mill. Domestic material only. PACKAGING REQUIREMENTS: Plates are to be palletized separately. All mill markings will be face up. Standard commercial packaging for this type of material is acceptable. . Government Delivery Requirements: The Government requires all material to be delivered within 10 weeks after receipt of an order. Contractors must provide an accurate and realistic delivery schedule based on information from the mill they will obtain the material from. Additional requirements: Certificate of Conformance: All items listed shall be accompanied with the certificate of conformance and test report. The certification shall contain the manufacturer, the mill lot, and the heat lot identification as a minimum. All metal shall be marked with manufacturer, the mill lot, and/or heat lot identification, size permitting. The test report shall show data such as the requisition number, description of material, chemical analysis and mechanical properties. Packaging standards shall not be less than Hardwood skids; 1” wider and 1” longer than product Width and length protective edging with reinforced corners Heavy cardboard/wood top and bottom, same size as product Cross boards for banding, no metal-to-metal banding Multi-packs are acceptable. Each item must be packaged properly and must have the correct paperwork. Mark each package with the requisition numbers and local stock numbers (to be provided upon award). Direct shipping from vendor required (no sub-vendor shipping) to ensure all specifications are met. The required delivery date (RDD) in accordance with FAR 52.211-8 is 10 weeks after receipt of order. If any contract takes exception to this required RDD the contractor must propose their most realistic delivery date and or delivery schedule in accordance with FAR 52.211-8. All transportation charges to be paid by the contractor without additional expense to the Government. Offers submitted on a basis other than F.O.B. Destination will be rejected as non-responsive and offers may be deemed unacceptable. Delivered to San Diego, CA 92135. Jim Terhune President T&T Materials, Inc Ph: 888-909-9119 Fax: 585-486-1187 www.tandt-materials.com **** Hidden Message ***** James Terhune 170 Mt. Read Blvd. Rochester, NY 14611 USA Company: T&T Materials Title: President Phone: 8889099119 Fax: 5854861187 E-mail: jimt@tandt-materials.com **** Hidden Message ***** jimt@tandt-materials.com |
|
|
|
|
|
|
