Quote Request |
| 02-13 20:45:31 来源： 作者： |
|
Quote Request Inquiry (采购产品): Quote Request BRIEF TECHNICAL SPECIFICATION OF HOT ROLLED COILSEND USE VERY THIN GAUGE GALVANIZED CORRUGATED SHEETS Technical Specification in conformity with SAE-1006 (Modified)Physical Dimension and condition.Tolerance on width + 1% of width, - 0% of width, Tolerance on widthAs per SAE 1006, Un-pickled, Un-oiled, Skin passed with mill Edge,Coils should be tight and square wound, Coil both ends should besquare- No fish tail, Inner Diameter 762 mm, Outer diameter 2000 mmmax, Coil Weight-Minimum 18 kg/mm of coil width but max. to the extentof 20 MT (16MT to 20MT), Telescopic and collapsed coils notacceptable, Coils should be suitably strapped on eye andcircumference. Chemical Composition-Carbon-0.05% max, Manganese 0.20 max, Phosphorous-0.030 max, Sulphur0.030 max, Silicon- As minimum as possible, (should be AluminumKilled), Hardness 55 60 HRB maxTensile Strength 27-30 kg /mm2 Camber, Thickness run down along thelength and across the width as per SAE 1006, Wedge across the widthNot acceptable, Defects-Free from major defects viz. Holes, Pits, Bodyand Edge Lamination seams slivers rolled in scale pitting etc.TRAMP element: low Size Assortment :1.60 mm X 800 mm = 80%1.80 mm X 915 mm = 10%2.00 mm X 915 mm = 10%Monthly Requirement: 5,000 to 6,000 MT (Approximately) please advise if can provide for bangladesh. thank you zahir 718 737 1670 **** Hidden Message ***** zahir chowdhury 3205 112 street 1floor east elmhurst, NY 11369 USA Company: jk associates pvt ltd Title: mr. Phone: 718 737 1670 Fax: n/a E-mail: zahirchy123@yahoo.com **** Hidden Message ***** zahirchy123@yahoo.com |
|
|
|
|
|
|
