Quote Request for tray cable 18AWG 6 conductors wet and dry |
| 02-13 20:52:43 来源： 作者： |
|
Quote Request for tray cable 18AWG 6 conductors wet and dry Inquiry (采购产品): Quote Request for tray cable 18AWG 6 conductors wet and dry location Attached is the spec for tray cable that we need for new led architecture lighting application. Please take a moment to review and make a custom cable for us to meet this spec. You can follow standard color code: Black, Red, White, Green, Brown and Blue for conductor. We prefer the green center conductor and 5 other color conductor around. Please, give us a quote in quantity of 500, 1,000 and 2,000Ft and lead time. Thanks. Best Regards. Nam Nguyen Data Display Products 445 South Douglas St El Segundo, Ca 90245 310-640-0442 ext 233 18 AWG 6 Conductor Unshielded 600V Control Tray Cable Specification – Quad Rated Description: 18 AWG, 6 conductor unshielded 600V control tray cable constructed with stranded bare copper, polyvinylchloride and nylon insulation and an overall polyvinylchloride jacket. Individual conductors are manufactured in accordance with UL Standard 62, Type TFN/TFFN/VW-1. Cable is manufactured in the USA in accordance with UL Standard 1277 and NEC listed Type TC, suitable for use in Class I Division II hazardous locations and approved for installation in cable trays per Article 336 and for use as fire protective signaling cable per Article 760 of the National Electric Code. Cable may be installed in open air, in ducts or conduits, in trays or troughs and is approved for direct burial and outdoor applications. Jacket is sunlight resistant and cable is (UL) TC-ER approved for 600V, 75°C Wet or 90°C Dry, quad rated TC, PLTC, NPLF and FPL and meets or exceeds the requirements of IEEE 383 and UL 1581 (1685) 70,000 BTU/HR flame tests. 1. Conductor 1.1 AWG Size & Stranding: 18 AWG, Class B 7 Strands 1.2 Material: Annealed Bare Copper 2. Insulation 2.1 Material: Polyvinylchloride & Nylon per UL Standard 62, Type TFN/TFFN/VW-1 2.2 Wall Thickness: 0.015” PVC & 0.005” Nylon - The minimum at any point shall not be less than 90% of the specified wall thickness 3. Color Code 3.1 Code: Black White Green Gray Violet Yellow 4. Assembly 4.1 Lay Length: Per UL Standard 1277 4.2 Fillers: N/A 4.3 Binder: N/A 4.4 Shield: N/A 4.5 Drain Wire: N/A 5. Jacket 5.1 Material: Polyvinylchloride per UL Standard 1277 5.2 Wall Thickness: 0.045” - The minimum at any point shall not be less than 80% of the specified wall thickness 5.3 Diameter: 0.340” 5.4 Color: Black 5.5 Weight: 76 lbs./Mft. 6. Markings 6.1 Type: Cable shall be permanently identified via surface inkjet print 6.2 Legend: 18AWG 6C (UL) TC-ER 600V PLTC NPLF FPL PVC/NYLON 90’C DRY 75’C WET PVC JACKET SUN RES DIR BUR “ROHS” 7. Standards 7.1 UL listed as Type TC-ER per UL Standard 1277 and Quad Rated TC, PLTC, NPLF & FPL 7.2 UL approved for Sunlight Resistant & Direct Burial applications 7.3 Individual conductors pass UL VW-1 flame test, rated TFN/TFFN/VW-1 7.4 Cable meets IEEE 383 & UL 1581 (1685) 70,000 BTU/HR flame test requirements 7.5 Meets ICEA S-95-658, where applicable 7.6 All materials used in the manufacture of this cable are RoHS compliant **** Hidden Message ***** Nam Nguyen 445 South Douglas St El Segundo, CA 90245 USA Company: Data Display Products Title: Design Engineer Phone: 310-640-0442 ext 233 Fax: 310-640-3314 E-mail: nam@ddpleds.com **** Hidden Message ***** nam@ddpleds.com |
|
|
|
|
|
|
