Inquiry (采购产品): Foam I am looking for a couple types of foam that go into several large contracts for Body Armor for our military. They both would need to be Berry Compliant, meaning made in the USA with USA raw materials. 1 3.2.7 Foam. The foam, located within the side plate pockets and back foam pocket, shall be closed cell with the properties specified in Appendix A, Table II when tested as specified in ASTM D-3575. The foam shall be sandwiched between the last layer of ballistic filler and back of the cloth inner shell. Table II. Foam Characteristics (see 3.2.6) Characteristic Requirement Density 3.1 lb/cu ft Thickness 0.25 in Compression Strength 6 psi @ 25% deflection 15 psi @ 50% deflection Elongation at Break 220% (min) Tear Resistance 19 lbf/in (min) Water Absorption of Surface 0.04 lb/sq ft (max) 2 3 I am also looking for 1” Coast Guard approved flotation foam. Do you have spec for this? Look forward to hearing from you. Thank you **** Hidden Message ***** Jeff Skinner 33323 Company: Protective Products INTL E-mail: jskinner@body-armor.com **** Hidden Message ***** jskinner@body-armor.com
