Inquiry (采购产品): Quote Request I am working for a client in Chester Springs, PA, who needs to Teflon Coat a stainless steel stir paddle. The paddle in question has a 3/16" diameter shaft about 6" long. There are four blades that spiral outward from the shaft a to a diameter of approximately 8 inches. Each blade has 11 upper and lower tines extending from a central band. The total area of coverage is approximately 60 sq.in. The coating should be FDA approved for product contact. Feedback on appropriate thickness, approximate cost and time would be appreciated. Best Regards, Lee Barger Mechanical Design Consultant Eclectech, Inc. 919-732-5435 lee.barger@eclectechinc.com **** Hidden Message ***** Lee Barger PO Box 656 Hillsborough, NC 27278 USA Company: Eclectech, Inc. Title: Mechancial Design Consultant Phone: 919-732-5435 E-mail: lee.barger@eclectechinc.com **** Hidden Message ***** lee.barger@eclectechinc.com