Inquiry (采购产品): 15KW DC-DC Converter Hello, I work with a small military contractor who has been asked by Army TACOM to look into a DC/DC converter for a military ground vehicle APU. This would be fed from a permanent magnet generator on our small high-speed turbine engine. Primary specifications: Power Output: 15 KW at 28 VDC +/- 5% regulation. Input Range: 325-450 VDC. 3-phase rectified. Ripple is <10% @ > 2 KHz. Cooling: Forced air. (cannot be liquid cooled) Packaging: Custom. Ruggedized. Mil temp range. Major goal is minimum size. Protection: Appropriate fusing. Overtemp. UV lockout. Power good/fail signal. Communication with other vehicle systems TBD. Need not be considered here. ------------------------------- If this is of interest, please respond with 1. Minimum volume estimate for production unit. (W/cu.in) 2. Rough cost estimate range for NRE and proof-of-concept unit. 3. Rough cost estimate range for production unit (100s). Thank you. Steve Geppert Steven Geppert Technical Directions, Inc. 1210 Oakbrook Drive. Ortonville, MI 48462 sgeppertco@sprintmail.com 248-855-2099 FAX: 248-855-2204 Cell: 248-252-0262 ===================================== **** Hidden Message ***** Steven Geppert 48462 Company: Technical Directions, Inc. E-mail: sgeppertco@sprintmail.com **** Hidden Message ***** sgeppertco@sprintmail.com
