印度求购防蚊蚊帐 buying Polyester Mosquito Bed Nets 295000 Nos.Company Name: MIDDLE EARTH Contact Person: Mr. Shabbir T. VakanerwalaStreet Address: 20, Basement Ashoka Shopping Centre, L T Marg, Next To G T HospitalCity: Mumbai Province/State: Maharashtra Country/Region: India Zip: 400001 Telephone: 91-22-22620780 / 2620779Mobile Phone: 91-9322605453Fax: 91-22-22620779 Detailed Technical Specifications For Mosquito Bed Nets.Polyester Single bed net conforming to IS: 14953* - 2001 Variety 2.The Equipment materials and workmanship that meet other authoritative standards, and which ensure at least equivalent quality will also be acceptable.All Goods materials to be incorporated in the goods shall be new , unused and of the most recent or current models and that they incorporate all recent improvements in design and materials and shall comply with the technical specifications given in this section.A) DimensionsThe nets shall conform to the following Dimensions:Length.Cm. : 180 (+-5)Width, Cm : 100 (+- 3-4)Total Height (Including Bottom Reinforcement Piece) cm: 150 (+-4)Height of Bottom Reinforcement Piece, Cm: 28 (+-3)B) Colour / ShadeColour / Shade of the Nets Shall are White.C) Recommended Requirement of Polyester Mosquito Bed Nets :C-1) General Requirement.The netting shall be made from polyester Multifilament Yarns of 75 Denier I.E Variety 2 or IS specifications .The Size of Mesh of the shall be 156 .The Denier of multifilament yarn shall be within + - 10% Tolerance when tested by the method given in IS:7703 ( Part 1 ) The holes in the mesh of the netting shall be round.The bed nets shall be reinforced at the bottom edge of the walls in accordance with the clause 4.2 of I.S.Specifications.The bed Nets shall be packed in Bundles of 50 Nos as per clause 7 of IS specifications. Goods shall be packed properly to prevent damage or deterioration and withstand rough handling and exposure to extreme conditions during transit to their final destination.C-2) Specific Requirements.The netting shall conform to the following requirements.Characteristic Requirements Method of Test Width 122 / 109 + - 1 Cm IS 1954Weight (Grams per Square Metre) Minimum 28 IS1964No of holes within 6.25 Cm2 Are.A) For 156Mesh 28 to 33 (As Per Amendment no 1. June 2003 to IS 14953 : 2002Bursting Strength Kpa Min 274 IS 1966PH Value of aqueous extract 6.0 to 7.5 (Cold Method) IS 1390Water Soluble matter, Percent 1.0 Max IS 3456Colour Fastness:A) To Washing ( Change in Colour ) Rating 4 or better IS 764B) To light Rating 5 or better IS 2454Kindly Call me on 00919322605453 Shabbir.T.V.
