Please send us your best price for the construction tower elevator as according to the specification below as soon as possible. TOWER ELEVATOR SPECIFICATIONS: Elevator Type : Industrial Class 1, Division 2, Gas Group B, C and D (Explosion proof) Capacity : 1000 kgs Height of travel : 30.00 meters (Height of travel and height of the building 30.00 meters) No of stops : 4.0 (Ground floor, 5th floor & 6th floor so total is 3 stoppage points) Quantity : 1.0 No. Door to be : Sliding Type Rated Voltage : 480 volts, three phase, 60 hertz Height : 30 M (Height of travel & height of the building 30.00m) Hazardous Area Classification: Class I, Div II, Gas Group B, C and D Ambient Temp : 500C Location : Outdoor Outdoor Atmosphere: Hot and Humid, Coastal Plot and Sandstorms with very fine dust Relative humidity : 10-100% Seismic Classification: UBC Zone 1 Codes & Standards : ANSI, IEEE, NEMA & NEC Motor starter and any other control and protective device shall be provided. A separate branch circuit shall supply power to car lights, receptacles and ventilation. A ground fault circuit interrupter protection (GFCI) for personnel shall be provided for each receptacles installed. Fire alarm & detection system shall be provided. It shall be hooked up to the existing fire alarm system. This shall be confirmed later. Provision shall be made for installing 1 no of telephone instrument. It shall be hooked up to existing system. All cables and control wires shall be contained in conduits. The installation standards shall be as per NEC. Provision shall be made for connecting the alarm and fault signals to control room. Emergency push button shall be made available inside the car. I want to receive: Product Spec . Price Payment . Sample Needed . Delivery Info . Product Catalog . Minimum Order . Inventory Info . Packing Info . ALAA INTERNATIONAL CONTRACTING COMPANY MUHAMMED RAFI ABDUL RAHMAN muhammed.rafi@afi.com.sa +966-3-8470033
