CompositionHand bag holder consists of Circle shaped metal centre grip base ; logo on top side,in 2 colours (branding printed on the PVC patch). From the top of the circle disk there is a small bar attached to a curved piece of metal. The bottom of the curved piece of metal has a hinge and is attached to another curved piece of metal the same size, this is then attached with a hinge to a third curved piece of metal. The final piece of metal is also hinged from the last piece and is longer in length but has the same amount of curve. This last piece creates the hook. The metal parts should be curved in shape and hinged so the metal can be wrapped around the centre disk when the item is not in use. Each hinged link has four sides so each curved shape has flat sides all the way round but is rounded at the end/tip of the link.Size 34mm diameter of metal disk, 8mm height. First 3 curved links 30mm each includes curved shape. Last curved link 54mm length including curved shape all links are 5mm wide on top, bottom and both sides.ColourPink ribbon 100% MagentaWhite BackgroundPackagingEach item to be individually packed into a vented, printed, 50 micron PP polybag with a silica gel sachet.Price Range: 0,00~0,50 USDMinimum Order Quantity: 150000 Piece/PiecesCountry:Belgium
