Maximum pressure of 3, 300 PSI so as to allow a displacement of material (paint and aggregates) of up to 2.7 (gallons / min), (10.22 liters / min). A 2200 PSI the flow must be 2.4 (gallons / min) (9.08 liters / min. ) Control of the pressure should be electronicThe maximum step nozzle in case of using a gun should be 0.049 inch. And in case of use of 2 guns should be 0.038 inch.You must provide two complete sets of nozzles type striping tip (REV-TIP) in all sizes (from 0.021 to 0.049 diameter orifice) to demarcate lines from 4 inches of width until permitted by the nozzle 0049 and a complete set of nozzles REV-GUARD paint surfaces.The engine that drives the hydraulic system must be gas powered 6.5 HP.Country:Paraguay
