|
**** Hidden Message *****内容 Please quote FOB advice time of delivery, weight and measurements for the following item L韓ea Descripci髇 Unit Quantity Categor韆 1 ITEM: RIG-ROP-00037 INV-ROPE, POLYESTER, MARINE GRADE FIBER, 12 STRAND, 1-1/2-INCH DIA. OLD S/N 755-4160. CL 25 ROPE, CABLE, CHAIN, FITTINGS ROPE, POLYESTER MARINE GRADE FIBER, 12-STRAND SINGLE BRAIDED, ROUND PLAITED, 1-1/2-INCHES DIAMETER, 4-1/2-INCHES CIRCUMFERENCE, MIN. BREAKING STRENGTH 62,500-LBS, ELASTIC ELONGATION OF ROPE AT 20 PERCENT OF BREAK STRENGTH SHALL NOT EXCEED 3.4-PERCENT. 600-FT. COIL, CONTINUOUS FILAMENT YARN, NO EXTRANEOUS MATERIALS SHALL BE ADDED FOR THE PURPOSE OF WEIGHTING THE ROPE, SHALL BE AT LEAST 8.0 GRAMS PER DENIER TENACITY, APPROX. WT. PER 100 FT SHALL BE 67.2 LBS., SHALL BE TREATED WITH SUITABLE MARINE CORDAGE FINISH TO IMPROVE ABRASION RESISTANCE UNDER WET OR DRY CONDITIONS, THIS MATERIAL SHALL COMPLY WITH MINIMUM PERFORMANCE REQUIREMENTS INDICATED IN CORDAGE INSTITUTE GUIDELINE CI 2011-02 P, DATED OCTOBER, 2002. ROPE SHALL BE COILED AND BOUND ON CARDBOARD OR PLASTIC TUBE AND PACKAGED FOR EXPORT IN REINFORCED PLASTIC OR BURLAP AND SECURED TO ONE WAY PALLETS. ID TAG IN EACH COIL IS REQUIRED AS PER ACP SPEC. NO. 755-377, REV. 1, DATED OCTOBER 25, 2006. /ROPE MILL TEST CERTIFICATE AND CERTIFICATE OF COMPLIANCE SHALL BE SUBMITTED WITH SHIPMENT AND A SECOND COPY MUST BE SENT TO THE CONTRACTING OFFICER ADDRESS, FAX OR ELECTRONIC MAIL, AS STATED ON THE CORRESPONDING TENDER. ACP ORDER NUMBER, STOCK NUMBER, NAME AND AUTHORIZED SIGNATURE SHALL APPEAR ON BOTH DOCUMENTS/ /DESCRIPTION REVISED BY MROW-QAS ON JULY 2007/ SPEC. NO. 755-377 October 25, 2006 REV. 1 SPECIFICATIONS FOR IDENTIFICATION OF ROPES 1. SCOPE: This specification states the minimum requirements for the identification of ropes supplied 2. GENERAL: A water resistant tag shall be supplied with each coil. The tag shall be securely affixed to the lead end of each coil by a tight twisted wire or hog ring. The tag shall be imprinted with water proof ink and shall contain detailed information of the rope supplied in that coil: 3. INFORMATION: a. Manufacturer's name and site of fabrication b. Type of rope, twisted, and number of strand c. Type of fiber d. Diameter of circumference of rope e. Length of rope in coil. f. Breaking strength of rope (minimum, average, maximum) g. A four (4) digits number, different for each coil supplied. Manufacturer shall select sequence of numbers. h. stock number and shipping marks shall be written on each coil. Best regards, Carlos Salazar C. Coordinador de Proyectos ENERCOM, S.A. Panama, Rep de Panama Tel.: 507 314-1328 Ext. 228 Fax: 507 314-1327 Cell. 507 6618-9594 csalazar@bkpanama.com I want to receive: Product Spec . Price Payment . Delivery Info . Packing Info . **** Hidden Message *****联系方式 ENERCOM, S.A. Carlos Salazar csalazar@bkpanama.com 00-507-3141328
|
