Inquiry (采购产品): Developing a prototype Hi, At VivaScan we’re in the business of non-invasive glucose measurement for diabetics. Currently we’re developing devices at the preclinical level and have an idea that we’d like to try out. This idea would require applying a reflective coating to the inside diameter of a tube that is approximately 10-15mm in diameter and 20-50 mm long. It most likely would be made from a rapid prototyped stereo lithography part and would need to be at least 90% reflective. Preferably the outside of the part would be masked for the plating procedure, but it’s not critical is plated material ended up on the outside of the part. We would be interested in producing 1-2 parts for testing and prototyping. Is this something that your company would be able to do? I would be interested in speaking with a salesman about this to learn a little more about what’s possible. Thank you, Greg Fischvogt Design Engineer VivaScan Corp 560E Prospect St West Boylston, MA 01583 508-852-1600 X203 **** Hidden Message ***** Greg Fischvogt 01583 Company: VivaScan Corp. E-mail: gfischvogt@gmail.com **** Hidden Message ***** gfischvogt@gmail.com
