Inquiry (采购产品): Request for Quote Could you please provide pricing and lead time for the following: Conveyor 1) Troughed Bed 2) 20 Feet long 3) 16” Wide overall 4) 12” – 13” Between side rails 5) 2 ? inch side rails 6) 33 inches tall overall height 7) Drive motor on discharge end 8) Drive motor located under conveyor 9) E stop on both ends of conveyor 10) 110 volt power source 11) Variable speed Drive motor 5 – 50 FPM 12) Must have torque at low end speed range 13) Belt must slide under parts when they hit end stops (currently using a non porous 2 ply .11” thick food grade belt that works well) 14) Fixed end stop Conveyor Components 1) 70 feet of lane dividers (2 Inch tall dividers) 2) Require seven (7) complete lane divider holder assemblies, each capable of holding four (4) dividers. Rail Clips to hold lane dividers Cross Block Quick Adjust Rod Couplings assy 5/8 SS rods for holding Lane dividers Skate wheel conveyor components 1) Legs for 12 wide skate wheel conveyor, two (2) sets required to hold conveyor at 33 inches tall, must be capable of mounting to floor. Thank you for your assistance. Respectfully, Scott Smith Mast Technology, Inc. Phone: (816) 796-0480 Ext 24 Fax: (816) 796-0485 Mobile: (816) 516-7942 Email: s.a.smith@mast.bz **** Hidden Message ***** Scott Smith 64051 USA Company: Mast Technology, Inc. Title: Purchasing Manager Phone: 816-796-0480 ext 24 E-mail: s.a.smith@mast.bz **** Hidden Message ***** s.a.smith@mast.bz
