Inquiry (采购产品): quote Dear Sir. We come from the dental industry; we are developing a new product on the dental field. We are in tentative collaboration with Hereus Company. We believe that the product can be manufactured by ceramic injection molding. This is a product under development and confidentiality is required. Only if you accept confidentiality, proceed! 1. The component should be made from dental feldspathic porcelain. 2. The component physical dimensions are: 0.7mm thickness 5mm width and 10mm long, the actual shape and dimensions will be given on a later stage, the product should be manufacturing with structural tolerance of 0.05mm on the dimention specified. 3. The flexural strength above 450 Mpa. 4. The shade should mimic shade of a tooth enamel, and is known as “Vita porcelain shade guide” A1 and shade A2. 5. The component shout be 60% translucent, the exact transparency optical parameters 1.52. Measurements will be determent in a later stage. 6. The production price should be in competitive price. 7. Thermal shock: the temp range 2-80°C 3 minutes intervals. 8. The component requires one side glazed and opposite side none glazed. Initial Quantity: 50,000 Estimated annual requirement: 300,000 Immediate response will be greatly appreciated Dr. Amiram Vizanski Adar Amiram Ltd. 40 Pinhas Rozen Herzelia Israel Tel. #+972 54 6611035 Fax. #+972 9 9568207 Email: amiram_v@hotmail.com **** Hidden Message ***** Amiram Vizanski 64572 ISR Company: Adar Amiram E-mail: amiram_v@hotmail.com **** Hidden Message ***** amiram_v@hotmail.com
