Inquiry (采购产品): wood work I need: Approximately 300 board feet of white aspen. Kiln dried and quartersawn. I need this material ripped into 20mm widths. These strips may be jointed pieces i.e. scarf joints to avoid knots. I then need these strips laminated together. The parts will be approximately 130mm wide, and 1592mm long. The thicknesses will range from 2.3mm to 11mm. These parts will need to be flat on the bottom, have two asymetrical hourglass shapes cut in the side, and have an asymetrical profile cut in the top. As a construction process, it is not essensial that each part be made individually i.e. if you choose to laminate the 20mm strips into a single sheet 5 feet wide and cut multiple parts that is all right. The process above is the approximate relation to 100 parts to be made. If this is in your interest please feel free to contact me. danbayat@gmail.com or 775-287-4147 I am located in Reno NV. Thank you for your time. Regards, Dan **** Hidden Message ***** Dan Bayat 89502 USA Company: Phase1 Phone: 775-287-4147 E-mail: danbayat@gmail.com **** Hidden Message ***** danbayat@gmail.com
