request for quote |
| 03-07 04:43:00 来源： 作者： |
|
request for quote Inquiry (采购产品): request for quote DEAR SIR, PLEASE GIVE US YOUR BEST COMPETITIVE PRICES FOR THE FOLLOWING: 001 CABLE COMMUNICATIONS; FIBER OPTIC TYPE, 18-SAMSS-625 NOTES: POLE LINE HARDWARE: SUSPENSION ASSEMBLY WITH TWISTED CHAIN LINK FOR OPGW FIBER OPTIC CABLE COMPOSE OF THE FOLLOWING ACCESSORIES: ONE(1) EACH PROTECTOR ROD ALUMINUM ALLOY, ONE (1) EACH SUSPENSION CLAMP SUITABLE FOR OPGW CABLE WITH NORMAL DIAMETER OF 13.2 MM, ONE(1) EACH 90 DEGREE TWISTED SHACKLE AND ONE (1) EACH ANCHORSHACKLE HOT DIP GALVANIZED STEEL, AND ONE (1) EACH BOND WIRE #6 AWG, INSULATED, GREEN, ONE (1) METER LONG, THE FAILING LOAD OF THE SHACKLES AND MINIMUM BREAKING STRENGTH OF SUSPENSION CLAMP SHALL BE 70 KN. SUSPENSION ASSEMBLY SHALL BE AS PER ATTACHMENT-1, SHT-001, CAT# OXY-1360 OR EQUAL/COMPETATIVE DESIGN. INSPECT. CODE: A-175 (SPECIAL) PACK. SPEC. CODE: 831400 ATTACHMENTS: E001 A-7930 (NMR) REV.A E002 NMR TRANS. FORM E003 A-175(SPECIAL), REV.0 E004 ATTACHMENT-I, SHT-001, REV.0 INSPECTION REQUIREMENTS: IR000175 501 GENERAL TEMPLATE FOR SPECIAL INSPECTION 10/17/2000 ATTACHMENTS: ATTACH-1, SHT-1 (239072) 01/27 01/27/2007 A-175(SPECIAL)(239072) 01/27/ 01/27/2007 SA 8314-00 11/01/2000 A-7930(239072) 01/27/2007 01/27/2007 NMR TRANS FOR IR000175 501 OCTOBER 17, 2000 QUANTITY REQUIRED : 5,000 EA 002 CABLE COMMUNICATIONS; FIBER OPTIC TYPE, 18-SAMSS-625 NOTES: POLE LINE HARDWARE: DOUBLE DEAD END SET FOR OPGW FIBER OPTIC CABLE HAVING NOMINAL DIAMETER OF 13.2 MM, COMPOSE OF THE FOLLOWING ACCESSORIES. TWO(2) EACH ANCHOR SHACKLE AND TWO (2) EACH EXTENSION LINK HOT DIP GALVANIZED STEEL, TWO (2) EACH THIMBLE TYPE QT500-7, TWO(2) EACH HELICAL DEAD END AND TWO (2) EACH PROTECTION RODS ALUMINUM COVERED STEEL, ONE (1) EACH TAP-OFF CONNECTOR ALUMINUM AND ONE (1) EACH BOND WIRE NO.6 AWG INSULATED GREEN, ONE(1) METER LONG, THE FAILING LOAD OF THE ANCHOR SHACKLE, EXTENSION LINK AND THIMBLE SHALL BE 120 KN, DOUBLE DEAD END SET SHALL BE AS PER ATTACHMENT-1, SHT-002, CAT#ONY-1410-02-00 OR EQUAL/COMPETATIVE DESIGN. INSPECT. CODE: A-175 (SPECIAL) PACK. SPEC. CODE: 831400 ATTACHMENTS: E001 A-7930 (NMR) REV.A E002 NMR TRANS. FORM E003 A-175(SPECIAL), REV.0 E004 ATTACHMENT-I, SHT-001, REV.0 P001 A-8314-00 INSPECTION REQUIREMENTS: IR000175 501 GENERAL TEMPLATE FOR SPECIAL INSPECTION 10/17/2000 QUANTITY REQUIRED : 2,000 EA 003 CABLE COMMUNICATIONS; FIBER OPTIC TYPE, 18-SAMSS-625 NOTES: POLE LINE HARDWARE: SINGLE DEAD END SET FOR OPGW FIBER OPTIC CABLE, HAVING NOMINAL DIAMETER OF 13.2 MM, COMPOSE OF THE FOLLOWING ACCESSORIES. TWO(2) EACH ANCHOR SHACKLE AND TWO (2) EACH EXTENSION LINK HOT DIP GALVANIZED STEEL, ONE (1) EACH THIMBLE TYPE QT500-7, ONE(1) EACH HELICAL DEAD END AND ONE (1) EACH PROTECTION ROD ALUMINUM COVERED STEEL, ONE (1) EACH TAP-OFF CONNECTOR ALUMINUM AND ONE (1) EACH BOND WIRE NO.6 AWG INSULATED GREEN, ONE(1) METER LONG, THE FAILING LOAD OF THE ANCHOR SHACKLE, EXTENSION LINK AND THIMBLE SHALL BE 120 KN, SINGLE DEAD END SET SHALL BE AS PER ATTACHMENT-1, SHT-003, CAT#ONY-1410-01-00 OR EQUAL/COMPETATIVE DESIGN. INSPECT. CODE: A-175 (SPECIAL) PACK. SPEC. CODE: 831400 ATTACHMENTS: E001 A-7930 (NMR) REV.A E002 NMR TRANS. FORM E003 A-175(SPECIAL), REV.0 E004 ATTACHMENT-I, SHT-003, REV.0 P001 A-8314-00 INSPECTION REQUIREMENTS: IR000175 501 GENERAL TEMPLATE FOR SPECIAL INSPECTION 10/17/2000 QUANTITY REQUIRED : 500 EA REQUIRED DELIVERY DATE FOR LINE ITEM 001 – 003: APRIL 30, 2007 004 MANUFACTURER IS REQUIRED TO SUBMIT PRELIMINARY DRAWINGS WITH THE BID FOR REVIEW AND APPROVAL BY BUYER FOR LINE ITEM= 001 – 003 AS DETAILED IN THE 601 SECTION OF THE ATTACHED NMR FORM A-7930. MANUFACTURER SHALL SUBMIT THREE (3) HARDCOPIES. QUANTITY REQUIRED : 03 EACH REQUIRED DATE : MARCH 30, 2007 005 MANUFACTURER IS REQUIRED TO SUBMIT CERTIFIED DRAWINGS AND LITERATURE FOR LINE ITE = 001 – 003 AS DETAILED IN THE 602 SECTION OF THE ATTACHED NMR FOR A-7930. MANUFACTURER SHALL SUBMIT THREE (3) HARDCOPIES (AN ORIGINAL AND TWO (2) COPIES) AND AN ELECTRONIC FILE. AN ACCPTABLE ELCTRONIC TRANSMISSION FORMAT INCLUDES: 3-1/2 INCH GLOPPY OR A CD-ROM QUANTITY REQUIRED : 03 EACH REQUIRED DATE : MARCH 30, 2007 006 MANUFACTURER IS REQUIRED TO SUBMIT OPERATIONAL/MAINTENANCE MANUALS, TEST CERTIFICATES AND INSTALLATION INSTRUCTIONS FOR LINE ITEM = 001 – 003 AS DETAILED IN THE 603 SECTION OF THE ATTACHED NMR FORM A-7930. QUANTITY REQUIRED : 03 EACH REQUIRED DATE : APRIL 30, 2007 UNIQUE REQUIREMENTS FOR LINE ITEM 001 – 003: INSPECTION REQUIRED : YES GENERAL CONDITIONS: MANUFACTURER SHALL USE AIR EXPRESS SERVICE (E.G. UPS, DHL/SNAS, FEDERAL EXPRESS, ETC) WHEN FURNISHING NMR'S TO BUYER. LOOKING FORWARD FOR YOUR KIND CONSIDERATION AND YOUR PROMPT ACTION WILL BE HIHGLY APPRECIATED FOR THIS REGARDS. YOUR QUOTATION SHOULD REACH US BY 26th MARCH, 2007 AND PLEASE LET US KNOW YOUR INTENTION FOR THIS INQUIRY. FURTHER CLARFICATIONS; PLEASE DO NOT HESITATE TO CONTACT THE UNDERSINGED. WARM REGARDS, SYED IRFAN SALES & MARKETING MANGER MOHAMMAD AL BIN SAEED (MASCO) TEL: +966 3 894 8268FAX: + 966 3 897 6609 MOBILE: + 966 55...MASCOSUPPLIES@YAHOO.COM **** Hidden Message ***** syed irfan p.o.box: 3744 Company: mohammad al bin saeed est E-mail: mascosupplies@yahoo.com **** Hidden Message ***** mascosupplies@yahoo.com |
|
|
|
|
|
|
