Inquiry (采购产品): SoftMax Quote Request Hello - I am not sure if you can provide what we need, but we need a quote for the design and manufacturing of 20 prototypes. At this point in time we are just looking for a quote to include in our proposal for the project. If we get approval, we will have 12 months to finalize design and delivery of the prototypes. The project is the microphone attached to the helmets worn on the flight deck on aircraft carriers. I am currently researching the cables and the enclosure for the electrical components. The product is a cable that comes out of the microphone housing and connects to the enclosure. There is another cable that connects the enclosure to the communications system. We need the enclosure and the cables to meet MIL-STD 810F & 461E. The enclosure will also need 3 switches for power, level, and mode. The enclosure will be roughly 5x3x2cm. Materials used in enclosure construction must be either metal, or metal coated ABS plastic for EMI (electromagnetic interference) resistance. The outside should be rubber coated for shock resistance and waterproofing. All cables will be made of acid/petroleum/salt/solvent resistant material. Connectors will be mil-std for use with the IFCS and related equipment. All switches/connectors/LEDs will be waterproofed in some fashion. Please let me know this is a project you would be interested in pursuing or not. **** Hidden Message ***** Heather Hitt 4350 Executive Dr Ste 201 San Diego, CA 92121 USA Company: SoftMax, Inc. Title: Office Manager Phone: 858-452-1900 x105 Fax: 858-452-7373 E-mail: hhitt@softmax.com **** Hidden Message ***** hhitt@softmax.com
