Inquiry (采购产品): elastomeric spring We are conducting disaster relief, marine salvage work in Alabama. I am looking for 15 to 20 springs that will compress 8 inches at 35,000 pounds of pressure. Inside diameter can be from 5/8ths inch to 4 inches. Other parameters unimportant. Do you have anything like this in stock? Can it be made? Would I need a double spring? Would a stack of elastomeric doughnuts work as well? I have a series of wire ropes that need to have a load absorbtion device at the end where they penetrate a 1" thick piece of steel. The wire ropes are 5/8" in diameter and have a flat button type termination at the end. The idea is to pass the wire through the spring and then the plate. A button stopper and flat plate attached to the top end of the wire rope would compress the spring. The cycling rate is very minor, probably less than 900 cycles for the life of the device at one minute intervals... My need is immediate. Thanks Wayne American Oceanics 415-686-6104 **** Hidden Message ***** wayne l 94966 USA Company: american oceanics Phone: 415-686-6104 E-mail: salvor@progigy.net **** Hidden Message ***** salvor@progigy.net
