Inquiry (采购产品): Oil Cooler hose I have an oil cooler hose requirement - specifically the hose I want to replace has the following information printed thereon: Kleber Industrie 2TE 16DIN IT.88 I need a supplier that can furnish this hose in relative small quantities, i.e .20 meters at a time, maybe 200 meters per year. The oil is Shell Diala AX transformer oil and the flow data are: 25liters/min at 0.35MPa (3.5 Bar)pressure. The max oil temp is approx. 70 degrees C with a minimum temperature of approximately -25 degrees C. We estimate the ID of the hose to be at approximately 0.5" - 0.625". The hose must be rugged enough to be located in an industrial setting like a foundry (dirt, petroleum oil) I will try to locate the required fittings (metric) elsewhere unless Gates has solutions for this portion as well. Very Best Reagrds, Eric Siegel **** Hidden Message ***** Eric Siegel 595 Old Norcross Road Suite G Lawrenceville, GA 30045 USA Company: Nat'l X-Ray Corp. Phone: 770.682.3090 E-mail: erics@nationalx-ray.com **** Hidden Message ***** erics@nationalx-ray.com
