Inquiry (采购产品): dispensing Epoxy Cairo: 31st March 07 From: Egyptian textile accessories MFG Co P.O.Box 122 El-Dawawin, Cairo , Egypt Dear Sirs We are looking for suitable positive dispensing /metering Pump for EPOXY ,material we need to dispense is EPOXY (Araldite and hardener )by two pumps through static mixer to fill horizontal aluminum channel 1-viscosity Pas: Araldite 10-25 hardener thixotropic mixed adhesive thixotropic specific gravity :Araldite = 1.2 to 1.3 hardener = 0.9 to 1.0 mixed adhesive 1.1 to 1.2 hardened+Araldite at normal atmospheric temp. 20 to 35Cent. cure time : 20 to 30 minutes pot life for mixed (100 Gm at 25 C temp) = 30 to 40 min. 2--Target of flow rate is about 6 Liter /hr with pressure about 2to 4 bar 3- Feed material: from cans 4- Power supply : 380V 3Ph , 50 Hz Mix ratio: parts by weight Araldite 100 : hardener 60 by volume 100 : 80 Pls let us have yr catalogue for suitable pumps can be used for dispensing/metering our Araldite and hardener Best regards Ghanem Aly ========================================================== Tel: +20-2-7957973 & 7959420 & 7959047 Fax: +20-2-7943120 E-Mail: info@ghanemco.com website: www.ghanemco.com **** Hidden Message ***** ghanem el-boghdady P.O.Box 122 El-Dawawin 72 Kasr El-Aini str. Cairo11521 EGY Company: Egyptian Textile Accessories MFG Co Title: G. Manger Phone: +20-2-7957973 Fax: +20-2-7943120 E-mail: ghanem-aly@hotmail.com **** Hidden Message ***** ghanem-aly@hotmail.com