Inquiry (采购产品): hinges I am looking for a replacement hinge for an Amerock "H" hinge - Colonial, hammered copper finish, surface mount, 3/8" offset with the hole spacing at 2.5". These are typical kitchen cabinet hinges. The attached drawings show the existing hinge with accurate dimensions. Printed on 8.5x11 paper, the hinges shown should be full size (but scanning may cause some distortion). The photo type picture is provided to show the 3/8" offset clearly. I can fax drawings, if needed. Also shown is a conceptual replacement - flat, surface mount, satin ss/chrome/nickle finish, 3/8" offset, 2.5" hole spacing, with outside dimensions not critical. I need about 70 hinges (or 35 sets). If you have such a hinge (any suggestions, links, references, etc.), please advise. Thanks. Darcy Stewart 606-561-4475 (couldn't attach drawings) **** Hidden Message ***** Darcy Stewart PO Box 457 Burnside, KY 42519 USA Company: CCS Phone: 606-561-4475 Fax: 606-561-4475 E-mail: cesium133@charter.net **** Hidden Message ***** cesium133@charter.net
