Inquiry (采购产品): Stainless flat stock I am looking for 1/8 X 1-1/4 stainless flat stock with a #8 finish or, someone to make parts using this stock. I manufacture specialty parts for mounting electronics on motorcycles and boats. In terms of parts I need two different angles bent, one with the long end 1-3/4 long and the short end 1-1/4 the other needs to be 1-1/4 on both sides. Each part needs a mild radius on the ends and laser cut holes. The bend would have to be made with brake tape to protect the finish. the holes would be to accomodate a 3/8 bolt on the long end of one and on one end of the other. The short end and the other hole on the equal angle would accomodate a 1/4 in bolt. The bolts are chromed and are centered at each end with the outer edge of the hole 1/2 inch from the edge of the radius. I am only a few miles away and can arrange to stop by if need be. Thank you for your time. Lester Custom Products Port St. Lucie, FL 34983 (772) 879-4874 **** Hidden Message ***** Butch Lester 34983 Company: Lester Custom Products E-mail: lesterbutch@bellsouth.net **** Hidden Message ***** lesterbutch@bellsouth.net
