Inquiry (采购产品): release liner Dear Sirs: I have a patent pending for a knife sharpening system that uses, as one of its components, a 9"x11" piece of 30 mil. magnetic sheeting with an adhesive back. Onto this adhesive I spray 1 coat of 3M ReMount Repositionable Adhesive followed by 2 coats of Krylon Easy-Tack Repositionable Adhesive. The supplied release liner is then replaced. This suits my purposes so-so but I'd prefer a material somewhat more substantial than the silicone-treated adhesive-release-liner (ARL) supplied since the liner will be R&R'd a number of times. The repositionable adhesive sheet is used to adhere a variety of abrasive sheet materials after which the ARL is replaced until the next sharpening session. I would prefer stock material which is considerably thicker but still available in rolls (preferably 10" in width, but ok at 12") or sheets 10"x12" at a cost of considerably less than $1.00/sq. ft. when purchased in quantities of 100 sq. ft. or more. Many thanks. I'm looking forward to hearing from you. Ron Leyva 6402 Japatul Highlands Rd. Alpine, CA 91901 **** Hidden Message ***** ron leyva 91901 Company: ronshe enterprises E-mail: layvuz4@nethere.com **** Hidden Message ***** layvuz4@nethere.com
