Inquiry (采购产品): Red Grip Handle Cover Good morning Bob, I recently received some feedback from the initial samples you sent me a few weeks back. 1) I would like you to try and tighten up the fit around the main part of the handles a little. The same reduction in diameter can be carried through to the cup and final fared at the end. 2)Do you think it is possible to make the recessed area that was machined into the mould to capture and hold the bottom lip on the black handle, more effective? 3) Reduce the overall length of the handle at the flared end by cutting back three quarters of the final flare extension. When we last talked I believe you told me this was simply a matter of reducing the degree to which the mold is dipped into the PVC solution. 4)What would my cost be to get 40 - 50 units to do a more in depth market study? **** Hidden Message ***** Bob Walsh 28 Pine Hill Crescent RR #4 Stirling, ON K0K 3E0 CAN Company: 1491107 Ontario Inc. Title: owner Phone: 416-459-2980 E-mail: bob.walsh@covcorp.com **** Hidden Message ***** bob.walsh@covcorp.com
