Inquiry (采购产品): flex tubing for antenna application I would like information regarding applying a flex gooseneck tubing for directionally pointing a patch antenna connected to a thin flexible cable. The flex tubing would be about 3.5-4 inch long with 0.2-0.3 inch outer diameter that would allow a U-turn (or step turn) with the best hold rigidity. The antenna is 1 inch square(few mm thick)dielectric panel with a soldered coax cable (~0.1 inch OD and 10 in long); the antenna panel will have two small holes at the bottom corners for screw fixturing to a compatible gooseneck termination plate just wide enough to accomodate the two screw hole fixturing;the other end of the 3-4 inch gooseneck would be a grommet termination for clamp fixturing between two semi-circular openings of a screw-together box. Antenna cables (1-3)will be strapped to the gooseneck at the antenna end with enough slack to accomodate the flex posiitons. Potential quantities 100K-500K year. Need prototype ASAP. **** Hidden Message ***** Michael Kim 6033 W. Century Blvd., Suite 1200 Los Angeles, CA 90045 USA Company: Infinesse Corporation Phone: 310-642-0250 Fax: 310-642-0252 E-mail: mkim@infinesse.com **** Hidden Message ***** mkim@infinesse.com
