Inquiry (采购产品): Quote the following by 11/29/05 2000 LB. Capacity Auxiliary Hoist Minimum Requirements ? Hoist motor must be capable of 2000 lbs., with and overload cut-off limit of less than or equal to 3000 lbs. (Reference Tech Spec. 3.9.6). ? Preferred is a three phase 480VAC motor, the following restrictions must be met: 1. Provide starting/locked rotor current (LRA) and time to acceleration. 2. Balance of nameplate information. 3. 480VAC motor 4. Provide recommended protective device sizing (if available). 5. Nameplate information ? Hoist and Trolley parts shall be designed with a minimum safety factor of five unless otherwise noted. ? Hoists ropes shall have a safety factor of six based on rated capacity of wire ropes. ? 40 foot lift capacity with stainless steel wire cable ? Variable speed ? Qualified coatings or not painted ? FME qualified ? Seismic II/I qualified ? Will fit and operate on existing S8 X 18.4 monorail ? Head room 25-11/16” ? Weigh same as presently qualified (500lbs.) or less. 1000 lb. maximum ? Variable motorized trolley with a rating of 65 FPM max. ? Duel trolley length of less than 40”. Provide: 1. Hoist model information meeting above requirements. Any deviations must be approved by an appropriate FPL responsible individual. 2. Provide certificate of compliance that weight of the hoist and lifting capacity is acceptable. **** Hidden Message ***** Sue Ann Coppens 34957 Company: Florida Power & Light E-mail: sue_coppens@fpl.com **** Hidden Message ***** sue_coppens@fpl.com
