Inquiry (采购产品): Hydraulic actuator My name is Dennis Grumm, and i am a student at Michigan Tech. University. My team and I are working on a project for the Facilities department here that involves the use of hydraulics to lift and meneuver large tables in-between rooms and buildings. Our design calls specifically for two actuators, which are preferably controlled through one foot pump. Our biggest concerns are the actuators themselves, which are of fairly specific dimensions. The smaller actuator should optimally fit inside of 7.3in (fully retracted, including bracketry) and have a stroke of 5.63in or greater. The second actuator needs to have a retracted length of 9in, and extend at least 7in. We realize the stroke needed with these seems fairly large with respect to the retracted length. Our question is then whether these dimensions can be found in a stock item, or if it is possible to have them custom built. And of course price and time constraints (needed by end of october) are also of interest. Thank you for your time. Sincerely, Dennis Grumm Mechanical Engineering, Michigan Technological University **** Hidden Message ***** Dennis Grumm MI 49931 USA Company: Michigan Tech University Title: Student E-mail: dmgrumm@mtu.edu **** Hidden Message ***** dmgrumm@mtu.edu
